浏览历史

WSL2010R0100FEA18

厂商名称: Vishay Intertechnology, Inc.

WSL2010R0100FEA18元件分类: 电阻

WSL2010R0100FEA18中文描述:
VISHAY DALE - WSL2010R0100FEA18 - RES; 金属带; 0.01OHM; 1%; 2010; FULL REEL
WSL2010R0100FEA18英文描述:
VISHAY DALE - WSL2010R0100FEA18 - RES; METAL STRIP; 0.01OHM; 1%; 2010; FULL REEL
WSL2010R0100FEA18封装
也许您对这个元器件感兴趣: S9S12VR64AF0CLF
S12VR混合信号MCU,适用于基于继电器的汽车和工业电机控制应用
了解详情

WSL2010R0100FEA18相关的参考设计

  • 5V - 36V input buck boost converter with dual output of 5V @ 6A and 15V @ 70mA - PMP7773.1 - TI Tool Folder
    PMP7773 is a SEPIC replacement buck boost step up/ step down converter with one inductor, two FETs and two diodes. The design also incorporates a boost converter and takes the 5V out and boosts it to 15V. It also has a switch capacitor converter. LM2662 takes the step up/ step down output and steps it to 10V which is used as a bias supply for boost converter LM5020.
  • 6V-42V Input 12V/5A SEPIC for Automotive Applications - PMP7797 - TI Tool Folder
    PMP7797 is a wide-input SEPIC converter designed for automotive applications. This design uses the LM25037Q push-pull controller as an interleaved boost, which incorporates two gate drivers for controlling two sets of MOSFET switches. The input is 12V nominal with a working range of 6V at cold crank to 42V at load dump. An auxiliary soft-start circuit is incorporated into the design, as well as input and output LC filters. At higher input voltage this SEPIC is capable of higher output current as shown by the typical efficiency plot.
更多参考设计
  • 在这购买

目前在售WSL2010R0100FEA18的国外分销商:

版权所有 © 2010 - 2016 与非门科技(北京)有限公司

京ICP证:070212号 北京市公安局备案编号:1101033715 京ICP备:10038094号-10