1N4148WS

The reference design presents non-isolated LED driver solution for 28W T8 tube application. The valley switching mode controller TPS92314 is used to achieve high effiency (>93%) over input range. Inherent PFC achieves high PF>0.92. The design includes EMI driver board and LED driver board. The overall size is around 100mmx16mmx14.5mm.

The PMP4304 is 7W TRIAC dimming LED lighting Driver with 180 to 264Vac input. It has only 50 components counts with low BOM cost:and it is TRIAC dimmable solutions without flicking. PMP4304 has a primary side that controls without opto-coupler and Constant On-time control with high power factor.

PMP10770 incorporates the TPS53219A and CSD87384M, which are the Green alternative to the TPS53355 30A dc/dc converter, and are 100% Pb-free. The design is for 10V-14V input, 1Voutput at 34A current with  83% efficiency at full load.

This demonstration board is aimed to drive 30W 6 channels LED system powered by constant current power supply. Thanks to the intelligent circuitry inside LM3466: the solution can provide accurate adjustable current branch equalization: well controlled current limit protection: adjustable color temperature and smart open string light intensity control. Meanwhile: the solution is power efficient and EMI friendly. It is especially suitable for street light application: eye care desk lighting and other multi-channel LED systems.

The PCM1864 linear microphone board (LMB) is an easy-to-use reference design for applications that are cost sensitive and require clear-spoken audio, such as voice triggering and speech recognition. This TI Design uses a linear microphone array (up to four) to capture a voice signal, and con

PMP6776 is a low-cost non-isolated synchronous buck power supply. This design uses TPS56121 and TPS54620 Synchronous Buck Converters and TPS54425 and TPS54225 Step-Down Switchers to generate 7 outputs. Features include input voltage range 10.8V to 13.2V and outputs 1V at 6A, 1.5V at 4A, 1.8V at 6

This reference design demonstrates low cost: high PF LED Driver solution for T8 tube application: which includes single stage Flyback with Primary Side Regulation topology using TPS92314(SOIC-8). The input range is 85~265Vac and output is 38~42V 420mA. Typical 90% efficiency and PF>0.9.

This reference design details a solution to drive and control two stepper motors for dynamic headlight leveling and swiveling in automotive headlight applications such as an adaptive LED driving module or a high-resolution DLP module. It uses a local interconnect network (LIN) system basic chip with integrated linear voltage regulator: two stepper motor drivers with a serial peripheral interface (SPI) and a microcontroller LaunchPad™ development kit.