Wed Aug 17 2022 06:30:15 GMT+0000 (Coordinated Universal Time)

随身查
mini app
扫码添加小程序
手机随时查器件
博客
CRCW08050000Z0EA
电阻器 > 固定电阻器

CRCW08050000Z0EA

Vishay Intertechnologies
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 0ohm, Surface Mount, 0805, CHIP, HALOGEN FREE AND ROHS COMPLIANT
数据手册:
ECAD 模型:
市场均价:
¥0.7434
市场总库存:
1,755,663
生命周期状态:
Active
风险等级:
0.98
风险等级:
设计
产品
长期
设计资源
ECAD 下载
注册免费下载原理图符号 、PCB 封装 、2D 和 3D 模型,它们都可以轻松拖放到所有主流 ECAD 工具中
ECAD 模型信息
可下载的格式
Altium Eagle OrCad PADS KiCad
下载 ECAD 模型档案,表示您同意我们的条款&条件以及隐私政策。
下载 ECAD 档案
关键词筛选:
LED电源 exterior lighting - headlight indoor lighting 运动探测器 NA NA lighting sensors 小型企业路由器 燃料电池控制单元 unidirectional 400 v & 800 v to lv unidirectional hv-to-lv digital loop bidirectional 400-v & 800-v to lv wired controls mixers blenders & food processors 打包机 包装机 室外照明 printer 数据集中器 refrigerators & freezers 空调室外机 audio dock: basic audio dock: portable audio dock: performance full authority digital engine control (fadec) 全球定位系统接收机 功率分析仪 半导体测试 flat panel display (fpd) test 电表 terminal unit (rtu dtu ftu ttu) multi function relay process bus (iec61850) ac / dc power sources 交流模拟输入模块 故障指示灯(FI) avionics: engine control/monitoring 工业机器人传感模块 ct scanners 电机诊断和监控 自动门 铁路辅助电源 铁路电力推进 暖通空调控制 string inverters micro inverters 伺服驱动控制模块 电表 无线通信 电能质量分析仪 前置摄像头 全景系统ECU mirror replacement / cms power line communications 电池管理系统(BMS) door & window sensor 标记 monitoring systems for rail transport handset: smartphone tablet: multimedia ultrasound scanners digital multimeters (dmm) AV接收机 3D打印机 无线音箱 遥测和RTU 电子病床和病床控制 陆地移动电台 非公路车辆HMI和显示器 智能音箱 独立远程IO 游戏控制器和外围设备 接近传感器 个人运输人机界面 移动POS 智能显示器 超声波扫描仪 自动分拣设备 光学检验 mobile robot motor control 混合仪表盘 可重构仪表盘 平视显示器 汽车辅助显示器 船用设备 汽车显示模块 汽车仪表板显示器 商用车仪表盘 摩托车仪表盘 汽车中心信息显示 oscilloscopes & digitizers 故障指示灯(FI) ac charging (pile) station dc fast charging station 电能质量分析仪 多功能继电器 交流模拟输入模块 有线通信模块 扩展模块 EV充电站HMI模块 无线电动汽车充电站 变电站自动化 dc wallbox charger 交流输入BLDC电机驱动 纺织机 印刷造纸机 注塑机 闭环步进电机 仪表板摄像头 智能手表 GPS个人导航仪 电动轮椅 医疗椅和医疗桌 洗衣机和烘干机 #REF! 洗碗机 烤箱 咖啡机 混合器 搅拌机食品加工机 电源供电工具 牵引逆变器电机控制 signal generator programmable dc power supply 单相在线UPS 医疗电源PSU 商用电信整流器 备用电池单元(BBU) 电器泵和风扇 电器:压缩机 医用配件 单相线路交互式UPS 烹饪顶 中短程雷达 远程雷达 驾驶员监控 未经处理的雷达模块 成像雷达 雷达ECU 机械扫描激光雷达 搜寻器前端 位置传感器 激光 robot sensing module 移动机器人传感模块 无人机视觉 安全区域扫描仪 安全光幕 机器人割草机 LED电源 bulbs tubes air circuit breaker (acb) 玻璃破裂探测器 温控器 火灾报警控制面板(FACP) 入侵控制面板 电源管理 力和湿度) hydraulic valves 压力变送器 温度变送器 force & humidity) 液位变送器 pneumatic valves displacement transmitter (angular linear & axial) hvac sensor transmitter (4-20ma) 三相不间断电源 动力传输单元 servo drive main power supply brushless dc motor drives ac drive main power supply 工业交直流 交流驱动功率级模块 动力传输单元 伺服驱动电源模块 single phase ups 空调室内机 全球定位系统接收机 脉搏血氧仪 汽车主机 定位器/跟踪器 血糖监测仪 可穿戴健身和活动监视器 售后主机 母亲和新生儿护理监护仪 处理器模块 前置摄像头 全景系统ECU ADAS域控制器 后视镜的更换/摄像头后视镜系统 汽车热像仪 驾驶辅助ECU 条件自动驱动控制器 串逆变器 数字万用表(DMM) 激光测距仪 冰箱和冰柜 空调室外机 家用热水器和供暖系统 真空机器人 人形 merchant dc-dc consumer ac-dc 商用DIN导轨电源 流量变送器 交流驱动功率级模块 ac drive energy recovery 伺服驱动功率级模块 motor brakes servo drive energy recovery 三相不间断电源 伺服驱动功率级模块 robot servo drive 飞机座舱显示器 interconnect/distribution box 断路器(ACB MCCB VCB) 实验室和现场仪器 过程分析(pH 煤气 专注
展开 收起
关键词筛选:
关键词筛选:
TIDA-01372
Automotive LED Front Lamp with Sequential Turn Animation Reference Design
This reference design is analog solution for automotive front lamp with sequential turn animation with the SEPIC topology: and this design also realizes full automotive diagnostic with low quiescent current during fault mode.
PMP5140 可提供 1.2V@10A 输出的 TPS40303 降压稳压器参考设计
PMP5140 is a single-phase synchronous switching regulator accepting input voltages of 3.3Vin or 12Vin and providing an output voltage of 1.2Vout capable of supplying 10A of current.
PMP10572 CN
PMP10572 面向 PoE 应用的隔离式 Fly-Buck 电源模块
The PMP10572 reference design is an single output isolated Fly-Buck power supply for PoE application. It takes 48V nominal input and provides 12V 1A output. The board is designed with TPS2378(PD controller) to provide 40V-57V input votlage and 12V 1SA output power. The design features the LM5160A
PMP8002
TPS92310 - 220VAC: 22W Non-isolated LED Driver with PFC for T8 Tube Application
The main purpose of this reference design is to demonstrate a high performance and low component count offline LED driver with PFC based on TPS92310. This LED driver is designed for converting an AC input to a regulated LED current. The operating conditions and performance of the reference design are as follows:●198VAC to 264VAC: 50Hz Input Voltage ●65V to 75V LED Voltage ●280mA Regulated LED Current ●88% Typical System Efficiency ●High Power Factor>0.9 ●Output Short-Circuit and Open-Circuit Protection.
TIPD195 CN
TIPD195 3 引脚 PLC 参考设计
This design inputs ±10V or ±20mA and outputs 2.5V±2.3V. It utilizes the INA188, which is a zero-drift instrumentation amplifier. The 2.5V reference voltage is provided by the REF3225. Measured performance yielded just 0.153% error (typical).<
PMP7856
Low Iq Dual Synchonous Buck Converter (10.3V@10A)
This is a synchronous buck converter with low Iq current. It has an input voltage range of 19V-to-32Vin and two regulated outputs: 10.3Vout @ 15A and 10.3Vout @ 10A.
PMP10099 CN
PMP10099 反向电源 - 八输入单输出参考设计
This reference design is a power solution for reverse-powered telecom applications. Up to eight isolated inputs provide one common output; the load is shared equally between all active converters.
PMP4475 CN
PMP4475 48V 输入、5V/2A、1/8 砖型 DC-DC 模块参考设计
The PMP4475 is a 5V / 2A reference design that implements a current mode controller LM5020. The input voltage range is 36V-72V with 48V typical. The efficiency is 85.1% at 48Vin and at full load. The design measures 51mm x 26mm x 12.5mm.
Ultra-Wide Input Voltage Range PSR Flyback Converter Reference Design
The PMP10200 reference design uses the UCC28700 primary-side regulated quasi-resonant flyback controller to generate a 28V output from an DC input. The input voltage range is between 25VDC and 520VDC. It is a low cost solution because no optocoupler is needed to regulate the output voltage.
PMP20946 适用于 LED 照明的 200W PFC + LCC 谐振转换器参考设计
此参考设计使用 UCC28180 CCM PFC 控制器和 UCC256301 宽输入电压谐振控制器作为带有集成式驱动器的 LLC 控制器。它可通过通用交流输入提供高达 200W 的恒定电流或恒定电压输出。可应用外部模拟调光电压信号来动态调节调光 LED 负载的输出电流。
PMP8877 CN
PMP8877 基于 UCD3138 数字控制器的 1/8 砖型隔离式 DC/DC 电信电源模块
PMP8877 is a full-function 1/8th brick isolated DC/DC telecom power module based on the UCD3138 digital power controller. The reference design features secondary side control and hard switching full bridge power topology to deliver 12V/180W of output power operating across a wide range 36V-72V in
PMP20212 CN
PMP20212 输入电压为 9V-15V 的可调节输出升压转换器 (150V-300V/10μA) 参考设计
此低电流升压转换器采用一个电压加倍器,可实现很高的输入/输出升压比。此设计的成本低,且仅需要 16mm x 27mm 的面积。
PMP10121
Offline AC/DC 77W Quasi-Resonant Flyback Converter Reference Design
The PMP10121 reference design uses the UCC28600 quasi-resonant flyback controller to generate 22V @ 3.5A from an AC input. This flyback converter is not isolated and no optocoupler is needed for regulation.
PMP9208 CN
PMP9208 用于笔记本电脑适配器应用的具有 85VAC-265VAC 输入的反激电源
The PMP9208 is a power adapter reference design for 19.5V output, constant voltage / constant current, 65W flyback power supply with 130W surge capability. Primary side regulation eliminates feedback opto-coupler and provides 1% regulation down to no-load. Average efficiency of > 89% and no lo
PMP5660 多变压器 2x25V (50V (700mA))
此 PMP5660 可提供从通用输入到两串 LED(每串最高 700mA,50V)的高效率二阶段解决方案:PFC TM 升压和多变压器 LLC 谐振。TLC555 可提供内部 PWM 调光功能。
PMP20708
Low Power Flyback Bias Supply Reference Design With Ultra Wide Input Voltage Range
The PMP20708 reference design uses UCC28881 low cost MOSFET integrated controller to provide 24V/30mA and 5V/30mA dual-output from an ultra-wide 24V to 264V (AC or DC) input. The board is in a small form factor of 30mm x 41mm x 12mm with minimized populated parts.
PMP4729 CN
PMP4729 用于 LED 驱动器的 SEPIC (13.5 - 18.0V @ 1.2A)
PMP4729 是一款用于汽车电子应用的宽输入电压范围 (8024V) LED 驱动器。其提供一组电流为 1.2A 的 3-4 个 LED (13.5 ..18V)。带有 TPS40211 的转换器位于 sepic 配置中,具有明暗调节输入 (100..200 Hz PWM) 和其他输入保护电路(瞬态保护、反极性保护)。
TIDEP0027 CN
TIDEP0027 面向工业应用并且采用 PRU-ICSS 的高性能脉冲序列输出 (PTO)
The TIDEP0027 High Performance Pulse Train Output (PTO) with PRU-ICSS for Industrial Application combines the AM335x Sitara processor family from Texas Instruments (TI) and the PTO module into a single system-on-chip (SoC) solution. The design is based on the TMDSICE3359 Industrial Communications
PMP10375 CN
PMP10375 335W 单级 LLC-SRC 转换器参考设计
The PMP10375 reference design is a single stage LLC series resonant converter (SRC), producing up to a 335W output using UCC25600 resonant controller. With the use of single stage LLC-SRC, the converter efficiency goes up to 90% at 335W full output power with 120VAC input.
PMP30251
50.6W Valley Switching Flyback with Universal AC Input Reference Design
The PMP30251 reference design uses the UCC28740 flyback controller  to generate an isolated output 23V@2.2A from an universal AC input. The UCC28740 uses an optical coupler to regulate the output and to improve transient response. The valley-switching technique reduces switching losses and keeps the efficiency high.
PMP30164
3-Phase Input Valley Switching Flyback and 5V: 12V Dual-Output Reference Design
The PMP30164 reference design uses the UCC28740 constant current (CC): constant voltage (CV) Valley Switching Flyback controller to generate two outputs (5V: 12V). The maximum peak output power is 28W (<20s). The design is optimized for a nominal output power of 1W and is capable of delivering 28W for 20 seconds.
PR270 CN
PR270 Virtex™-II 电源管理解决方案(设计 4)
Virtex™-II Design 4 - TPS40021 DC/DC Controller-based Power Management Solution Providing ICCINT = 20A from VIN = 5 V.
PMP10035
Offline AC/DC 75W 2-Switch Quasi-Resonant Flyback Converter Reference Design
This design uses the LM5023 flyback controller for the 2-Switch Quasi-Resonant Flyback Topology. It generates an isolated output (19.5V@3.84A) from an universal input (85VAC - 265VAC).
TIDEP0040 软件无线电 (SDR) 基于 OMAPL-138 的硬件/软件参考设计
Software Defined Radio (SDR) is a popular application within the wireless infrastructure market.  This hardware reference design, leveraging the real time signal processing of the TI DSP and its Universal Parallel Port (uPP), along with TI ADC and DAC, offers SDR algorithm developers a quick
PMP20432
100V to 410V DC Input to 12V/4.5A Output Bias Supply Reference Design
PMP20432 is an isolated bias supply reference design. With 100V or above input voltage: this design can provide maximum 2W output power. With 300V or above input voltage: this design can provide maximum 52W output power with 12V regulated output voltage. Peak 91.5% efficiency is achieved in this design.
PMP30094
3-Phase E-Meter Quasi-Resonant Flyback Reference Design
The PMP30094 has been designed especially for E-meters. It uses the UCC28600 quasi-resonant flyback controller to provide two isolated outputs (5V @ 2A and 7V @ 0.3A) from an 3-phase input. The input voltage range is between 140VAC and 470VAC.
PMP7966
Power Solution for an Automotive Fuel Injector
PMP7966 is a 4-phase boost converter rated for 52V output at 2.5A from an input voltage of 6V to 42V. This design uses LM5122 boost controllers at a switching frequency of 100 kHz each phase: resulting in 400 kHz input and output ripple. 680μF aluminum electrolytic capacitors are used at the output of each phase: providing hold-up to support large transient currents.
PMP10150
Universal AC Input: Dual 12V: -8.5V Output Quasi-Resonant Flyback Converter Reference Design
The PMP10150 reference design uses the UCC28600 quasi-resonant flyback controller to generate a 12V and a -8.5V output from an universal AC input. An optocoupler is used to regulate the 12V output.
PMP7967
Power Solution for an Engineering Equipment Fuel Injector
The PMP7967 converts a DC input of 6V-42V to an output of 90V at 1.5A.  The design uses four interleaved LM5122 boost controllers with each controller switching at 100kHz. The resulting 4-phase boost converter has a ripple frequency of 400kHz. Freqeucny can also be synchronized to an external signal. Four 330μF aluminum electrolytic capacitors are used at the output to support sudden load current demands in the fuel injector solenoids.
High-Q Active Differential Bandpass Filter Reference Design for Instrumentation Qualification
The TIDA-01036 reference design demonstrates a high quality factor (Q factor) active differential bandpass filter. Such filters improve signal source SNR and may be used for data acquisition (DAQ) module testing. This filter may also be used to design a signal conditioning circuit in a DAQ system analog front end.
PMP9061
Primary-Side Regulated Flyback for Universal AC Input and 16V/0.25A Output Reference Design
The PMP9061 reference design uses the UCC28910 primary-side regulated flyback controller with integrated MOSFET to generate a 16V/0.25A output from an univeral AC input. 80% efficiency is achieved at full load and less than 200mW power consumption is observed during no load condition.
PMP10168
Universal AC Input: Dual 12V: 5V Output PSR Quasi-Resonant Flyback Converter Reference Design
The PMP10168 reference design uses the UCC28710 primary-side regulated quasi-resonant flyback controller to generate a 12V and a 5V output from an universal AC input. It is a low cost solution because no optocoupler is needed to regulate the output voltages.
Power Reduction Using Dynamic Switching Reference Design
The TIDA-00675 shows the power reduction benefits of dynamically switching a load on/off using a load switch. The design guide shows how frequency of switching: duty cycle: and the use of a discharge resistor can have an impact on power consumption.
PMP9362
24Vin+/-10%: 5Vout @ 0.3A Flybuck Converter
An isolated flybuck converter with self-driven synchronous rectification on the secondary side accepts an input voltage of 21.6Vin to 26.4Vin and provides an isolated output of 5Vout capable of supplying a maximum of 0.3A of current to the load.
PMP30826
Offline supercapacitor backup power supply with active cell balancing reference design
This reference design provides a backup voltage during a power interruption. It manages the charging of supercapacitors directly from the mains voltage (96 VAC - 272 VAC). The UCC28740 provides constant-voltage (CV) and constant-current (CC) output regulation. The supercapacitor capacitance and voltage define the energy that is available for the backup.
TIDA-00949 采用单层 TO-247 封装的 3.3V 1A、低 EMI、效率达 92% 的直流/直流模块参考设计
TI 参考设计 TIDA-00949 展现了采用 TPS54202 的 15mmx20mm、效率高达 92% 的低电磁干扰 (EMI) 直流/直流模块,取代了大多数家电应用中的低压降稳压器 (LDO)。高效率消除了对散热器的需求,从而实现了尺寸更小、成本更低的解决方案。较高的电流容量支持添加更多功能(WiFi、传感器等)。高效率和低电流消耗有助于实现严格的能效评级。
TIDA-01051 CN
TIDA-01051 优化 FPGA 利用率和自动测试设备数据吞吐量的参考设计
TIDA-01051 参考设计用于演示极高通道数数据采集 (DAQ) 系统(如用在自动测试设备 (ATE) 中的系统)经过优化的通道密度、集成、功耗、时钟分配和信号链性能。利用串行器(如 TI DS90C383B)将多个同步采样 ADC 输出与几个 LVDS 线结合,可显著减少主机 FPGA 必须处理的引脚数量。因此,单个 FPGA 可处理的 DAQ 通道数量大幅增加,而且电路板布线的复杂性也大大降低。
PMP15005
Dual-Output Isolated Fly-Buck Reference Design With an Ultra-Small Coupled Inductor
PMP15005 uses the LM5160 in a Fly-Buck™ topology with the primary and secondary output both set to 5V nominal. The circuit accommodates a voltage input range from 14V to 36V: ideal for the 24-V nominal input rail. While the primary side is set at 5.4V nominally using the feedback resistors: the secondary isolated side sees 5V: which is based on Coilcraft’s LPD8035V series coupled inductor set at a turns-ratio of 1:1. The maximum operating current on both the primary and secondary rails are set at 225mA each.  The switching frequency is set at 300 kHz nominal.
TPS60500REF-193 CN
TPS60500REF-193 250mA 可调节 (0.8V-3.3V) 高效降压充电泵
The TPS60500EVM-193 is an evaluation tool for the high efficiency step-down charge pump TPS60500. The output voltage of the TPS60500 is adjustable in the range of 0.8V to 3.3V. On the EVM, the output voltage is set to 1.5V. The TPS60500 operates from an input voltage of 1.8V to 6.5V. The input voltage must at leat be 1V higher than the output voltage selected. The device delivers up to 250mA of output current.
PMP6251 150 Watt LED TV PWR
PMP6251 是用于 150W LCD 电视电源的参考设计,通过使用 UCC28051 构建 PFC,使用 UCC25600 构建 LED 驱动器 LLC 转换器,使用 UCC24610 构建 SR 电路以及使用 UCC28610 构建待机反向转换器。此款驱动器提供 4 路输出,包括 LED 驱动器、12V 3A、5V 4A 和 5V 待机 1A;并能够在 90~264Vac 下工作。LED 驱动器使用多变压器拓扑进行工作,其可以提高效率和减少组件数。介绍 PFC、LLC、级联 QR 反向操作和性能的全面分析以及设计优化准则。提供基于每个通用情况负载获取的实验结果。
TIDA-01335 CN
TIDA-01335 配备 RTD 前端的超小型 IO-Link 传感器变送器参考设计
This reference design demonstrates the IO-Link communication in a small form factor of just 6mm PCB width with integrated protection and a resistance temperature detector (RTD) sensor front-end. The highly integrated and tiny IO-Link PHY offers: ESD, EFT, surge protection and reverse polarity protection. The build in LDO and configurable output current provide easy and flexible system implementation and offer at the same time low power dissipation due to the ultra-low residual voltage. The 24 bit Sigma-Delta analog to digital converter (ADC) captures the RTD value (PT100 temperature sensor), which is converted in the MCU and sent via IO-Link to the IO-Link master
PMP9253
9 to 60Vin 5Vout @ 3A Isolated Flyback Converter Reference Design
An isolated flyback converter accepting an input voltage range of 9Vin to 60Vin and having an output of 5Vout capable of supplying 3A of current to the load.
TIDA-03029 CN
TIDA-03029 通过在可调节适配器与电池充电器之间建立握手机制以提升效率的参考设计
TIDA-03029 参考设计是一个软件实施方案,它使用集成型可编程数字到模拟驱动器,通过可调节高电压专用充电端口进行交互。此解决方案可根据充电电流要求,通过修改适配器输出电压实现充电效率优化。
TIDA-00987 CN
TIDA-00987 具有 USB 3.0 数据支持的 CISPR 25 5 类 USB Type-C 端口参考设计
TIDA-00987 是一款适用于需要数据传输的汽车媒体端口的参考设计。此设计能够通过 15W USB Type-C™ 端口支持 USB 2.0 和 USB 3.0 数据。通过利用包含符合 AEC-Q100 标准的经过 CISPR 25 5 类测试的模拟集成电路 (IC) 在内的完整参考设计,客户可加快其媒体端口系统速度。此设计打造了一款可靠灵活的解决方案,可让系统在 1 x 2.5 英寸小型解决方案内为 USB Type-C 和传统器件充电。
TIDA-00776 CN
TIDA-00776 效率高于 98% 的通用 350W CCM PFC 小型参考设计
TIDA-00776 设计是一种 350W 的经济实惠型功率因数稳压器转换器,专为冰箱和其他电器应用而设计。此参考设计是一种连续导通模式 (CCM) 升压转换器,使用 TI 的 UCC28180 PFC 控制器且具有所有必要的内置保护。硬件经专门设计和测试,符合家用电器的 IEC61000-3-2 (2014) 的电流谐波要求。
PMP1903 反向降压/升压转换器,300mA 时 5V 输入至 -12V,使用 TPS40200
PMP1903 uses the TPS40200 buck controller in an inverting buck boost configuration. This topology takes a positive input and generate a negative output. In this case 5V is converted to -12V at 300mA. The design operates at 500KHz, with ceramic input and output capacitors for small size.
PMP4302B CN
PMP4302B 90Vac~264Vac 输入 100W 4x500mA LED 照明驱动器(不含 Vcc 辅助反向电源)
该参考设计采用 TI 多变压器 LLC 控制器 UCC25710 及转移模式 PFC (Transition mode PFC) 控制器 UCC28810,能够为通用 LED 照明驱动器开发 100W 的四灯串(每个灯串的电流为 500mA)输出。该解决方案的主要优势是高效率、高功率因数以及良好的电流匹配。此外,该参考设计还采用创新型自启动电路来为一次侧 (UCC28810) 和二次侧 (UCC25710) 上的 Vcc 供电,且不需使用任何到电源主控制器的辅助反激转换器。该应用可用于路灯和商业照明等 LED 通用照明。
TIDA-01553 CN
TIDA-01553 支持 2.5V 冷启动配置且脱离电池运行的汽车类 VCM 参考设计
本参考设计是一个拥有高电流和宽输入电压范围的电路,可以应付低至 2.5V 的发动机冷启动配置。双路输出电压为 5V 和 3.3V,每个输出最高支持 10A 电流。此设计适用于需要支持低至 2.5V 的极苛刻启动电压的脱离电池运行的车用信息娱乐应用。
PMP8948 CN
PMP8948 汽车类升压转换器驱动两串 LED
This wide input voltage range boost operates from an input of 9V - 32V and regulates current in two strings of 13 LEDs. Additionally, a second control loop monitors and regulates the input current during drop outs or faults. This low cost design operates at greater than 94% efficiency.
TIDA-01448 效率达 93% 的 5V、1A、具有成本效益的单层 TO-247 LDO 更换参考设计
此参考设计展示了一款解决方案尺寸较小的高效率、低 EMI 直流/直流模块,可用于替代主要家电中的 LDO。使用直流/直流模块替代 LDO 可以显著提高系统效率,不仅能减小解决方案尺寸并节省 BOM 成本,而且还无需使用散热器。此模块占用空间与 TO-247 封装相同,并且与 TO-220 LDO(如 UA7805)引脚到引脚兼容,便于快速评估和缩短产品上市时间。TPS561201 电源转换器可在满载、低负载和待机状态下增加输出电流并降低功耗。此模块大小与 TO-247 封装相同,引脚与 TO-220 LDO 兼容,便于快速评估和缩短产品上市时间。
TIDA-00519
65W High-efficiency CoC-5 tier2/DOE Level VI AC Adapter
This is a high efficiency 65W AC/DC design for a Universal input (85Vac to 265Vac) to 19.5V @3.33A output exceeding CoC-5 Tier2 and DOE Level VI requirements for external power supplies using the LM5023 Quasi-Resontant Flyback Controller with UCC24630 Synchronous Rectification Controller and CSD19531Q5A MOSFET.  Additionally the LM8364 reset controller is used to provide input line AC UVLO protection.As seen at APEC
400-V to 690-V AC Input: 50-W Flyback Isolated Power Supply Reference Design for Motor Drives
This reference design provides isolated +24V (45W): ±16 V (4.5W): and +6V (0.5W) outputs to power the control electronics in variable speed drives.  The power supply can be either powered directly from 3-phase AC mains (380Vac to 690Vac) or can be powered from the DC-link voltage (400Vdc to 1200Vdc).  This design uses a quasi-resonant flyback topology and is rated for 50-Watt total output power.  The line and load regulation of the power supply is designed to be within 5% using primary-side regulation (eliminating costly feedback components). The power supply is designed to meet the clearance: creepage: and isolation test voltages as per IEC61800-5 requirements.
PMP7751 “LM3445 – 220VAC、7W 可调光隔离式
该演示板重点介绍了基于 LM3445 的反激式 LED 驱动器解决方案的出色性能,能够用于在 198 VRMS 到 264 VRMS 的电压范围以 50Hz 的输入电源对由 6/7 个串联 LED 组成的单个 LED 灯串进行供电。这款双层板使用底层和顶层进行组件放置。可对该演示板进行修改,以便调整 LED 的正向电流、需驱动的串联 LED 数量以及开关频率。敬请参阅 LM3445 产品说明书,了解更详尽的操作指导。配套提供的物料清单 (BoM) 对用于该演示板上的部件进行了描述。
PMP7179 具有 VID 控制功能的 9.5W 同步降压参考设计
PMP7179 参考设计采用 TPS51518 单相 DCAP/DCAP2 控制器生成 0.95V 至 1.05V 的输出电压和 9A 的最大输出电流。一个 2 位 VID 输入可选择四种不同的输出电压。
PMP30825
150-VDC - 430-VDC input: multiple output valley-switching flyback reference design
This 10-W non-isolated flyback reference design uses the UCC28742 controller to generate four outputs (5 V at 150 mA: 12 V at 690 mA: 15 V at 80 mA: 18 V at 20 mA). The controller provides constant-voltage and constant-current regulation. Transistors are used in place of an optocoupler feedback circuit to reduce the overall BOM cost.
PMP30197
5.85W Isolated Self-Driven Synchronous Inverting Fly-Buckboost with Optocoupler Reference Design
The PMP30197 reference design is an inverting Fly-BuckBoost power supply using the LM2743 to generate an isolated output voltage of 3.9V. The design accepts an input voltage of 2V to 5.25V.  The converter regulates the secondary side output with an optocoupler and is capable of achieving good output voltage regulation. The synchronous rectifier on the secondary output improves efficiency.
PMP9361
CISPR 25 Class 5 Rated 1.5W Automotive Power Reference Design
The PMP9361 reference design provides an EMI optimized 1.5W power supply design for automotive applications. This design features the LM34919C: a 50V: 600mA buck regulator: AEC-Q100 qualified: with a switching frequency up to 2.6MHz and in ultra-small 2x2mm DSBGA package: making it suitable for automotive applications. The power supply generates a 3.3V output at 500mA: and the switching frequency is set at 2.1MHz to avoid AM bands interferences. The design comes with the input EMI filter to suppress the conducted emissions. It is tested under the CISPR 25: the automotive EMC standard: and the result is compliant with the Class 5 conducted emissions standard.
TIDA-01344 CN
TIDA-01344 适用于 48V 汽车电池的汽车 10V-80V 超宽输入电压、12V 输出电压反激参考设计
TIDA-01344 参考设计是一种 24W、汽车 48V 电池前端电源,可在宽输入范围为 10V 到 80V 直流电压(瞬态电压高达 100V,符合 LV148 标准)的情况下生成 12V 电压。该系统包括符合 CISPR 25 要求的 EMI 滤波器和用于将高电压瞬态钳位至适用于下游电路的安全级别的电路保护。该反激式控制器无需光耦合器即可实现初级侧调整,从而延长使用寿命并可实现更小的电路板设计。该反激式变压器的设计通过汽车 AEC-Q200 1 级认证。
PMP30280
Ultra-wide Input Range (48VAC to 240VAC) Flyback Reference Design
The PMP30280 reference design generates two isolated outputs (6V @ 1.2A / 20V @ 0.15A) from an AC input (48VAC to 240VAC). The LM5021 operates at either a fixed switching frequency or in a skip cycle mode when the converter load is light. The design uses an optical coupler to regulate the output and to improve transient response.
PMP11155 通用交流输入、24V/1A PFC 反激式参考设计
基于 UCC28050 的此参考设计在单级中提供隔离和功率因数校正。该电路建立在 76mm x 50mm 的双层电路板上。测试报告记录了效率、功率因数、热、EMI 扰等方面的性能。
XIO2213BEVM XIO2213B 评估模块/参考设计
XIO2213B EVM 是 PCIe 至 PCI 转换桥接器的功能实现,其中 PCI 总线接口通过 3 端口的 1394b PHY 从内部连接至 1394b 开放式主机控制器/链路层控制器。PCIe 至 PCI 转换桥接器与 PCI Express 至 PCI/PCI-X 桥接器规范 1.0 修订版完全兼容。此外,该桥接器还支持标准的 PCI 至 PCI 桥接器编程模型。1394b OHCI 控制器功能与 IEEE Std 1394b 和最新 1394 开放式主机控制器接口 (OHCI) 规范完全兼容。它被设计为一种 x1 插卡,按照 PCI Express 卡机电规范 1.0a 修订版、PCI 本地总线规范 2.3 修订版和 IEEE 1394b-2002 中指定的路由指南和要求在标准 4 层电路板的 FR4 上路由,该电路板具有 100 Ω 差动阻抗(适用于 PCI-Express 差动对)、110 Ω 差动阻抗(适用于 1394b 对)和 50 Ω 单端阻抗。
TIDM-CAPTOUCHEMCREF CN
TIDM-CAPTOUCHEMCREF 抗噪声电容式触控 HMI 参考设计
抗噪电容式触控 HMI 设计 (TIDM-CAPTOUCHEMCREF) 是用于实现抗噪电容式触控人机界面 (HMI) 的参考设计。它集成了 TI 采用高性能 CapTIvate™ 触控技术的 MSP430FR2633 微控制器 (MCU) 和 TPS7A4533 线性稳压器以及 UCC28910 反激式开关。此参考设计展示了如何通过采用包含硬件设计技术、CapTIvate 技术外设功能和软件信号工艺的三位一体的设计方法,设计出能够通过具有挑战性的传导射频抗扰性、电气快速瞬变/脉冲群抗扰性和静电放电抗扰性系统级测试的硬件和软件。
PMP10407 具有快速负载瞬态响应的通用交流输入、5V/10A/50W PSR 反激电源参考设计
PMP10407 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller demonstrating the use of wake up device UCC24650 to achieve rapid load transient response from light load condition when the system is under low frequency operation. The elimination of
PMP9144 通用交流输入、效率为 88% 的 14V/2.4A 反激
This reference design provides an isolated 14.5V/35W output from a universal 85-265VAC input. It uses the UCC28740 flyback controller to provide high efficiency and minimize light load losses. Maximum load efficiency is over 88%. The average efficiency (measured at 25%, 50%, 75%, and 100
PMP9166 3.3V 输入、-0.5V/0.9A 输出、同步降压升压
This reference design uses the TPS54218 in a synchronous buck-boost configuration to generate a negative 0.5V output from a 3.3V input. Switching at 1MHz, the total solution size is extremely compact. An external LM4040 reference provides a precision pull-up voltage and is necessary to regulate t
PMP9449 Altera® Arria® V GX FPGA 电源解决方案
The PMP9449 reference design provides all the power supply rails necessary to power Altera's Arria® V GX family of FPGAs.  It utilizes a TPS38600 to monitor the input supply and provide power on sequencing.  This design features low cost, small footprint discrete ICs and is powered
PMP10150 通用交流输入、双路 12V、-8.5V 输出准谐振反激转换器参考设计
The PMP10150 reference design uses the UCC28600 quasi-resonant flyback controller to generate a 12V and a -8.5V output from an universal AC input. An optocoupler is used to regulate the 12V output.
PMP11612 CN
PMP11612 符合 CoC Tier 2 2016 标准的通用交流输入 5V 2A 输出参考设计
The PMP11612 is a reference design for 5V 2A adapter applications. The solution implements a high efficiency primary side controller UCC28704, it is fully test and passes conduction and Radiation EMI. This design uses diode rectifier for low cost and meets COC V5 Tier2 2016 specification with 150
PMP10666 用于高压激光闪存驱动器的低输入电压反激参考设计
PMP10666 is a 12W isolated flyback design that supports very low Vin of 3.3V-6V and is capable of delivering 100mA at 120V output. The design uses LM3481 Boost controller IC which works on current mode operation and can be synchronized to any frequency between 100KHz to 1 MHz. This design
PMP7967 135W 汽车类多相升压转换器
The PMP7967 converts a DC input of 6V-42V to an output of 90V at 1.5A.  The design uses four interleaved LM5122 boost controllers with each controller switching at 100kHz. The resulting 4-phase boost converter has a ripple frequency of 400kHz. Freqeucny can also be synchronized to an externa
Touch on Metal Buttons With Integrated Haptic Feedback Reference Design
This reference design uses our inductance-to-digital converter technology to provide a high-precision method to sense button presses on a metal surface and our haptic drivers provide high-quality haptics feedback to the user. TIDA-00314 demonstrates techniques for system design: environmental compensation and electromagnetic interference protection.Watch the TIDA-00314 overview video on the touch-on-metal buttons with integrated haptic feedback.
ADAS multi-sensor hub reference design with quad 4-Gbps FPD-Link III: dual CSI-2 output: and PoC
The TIDA-01323 camera hub reference design allows connection of up to four 2-megapixel: 60-fps cameras over coax cable. This design utilizes these coax cables to provide power: back-channel communication: and clock synchronization to the sensors. The 4-Gbps FPD-Link III quad deserializer supports dual-output Mobile Industry Processor Interface (MIPI) Camera Serial Interface-2 (CSI-2) over a Samtec connector to application processors. This design also allows the user to connect other types of sensors for sensor fusion applications.
PMP40580
180-W universal input PFC + LLC TV power supply reference design
This AC to DC power supply design for TV application provides 12-V: 5-A and 150-V: 0.8-A output from universal AC voltage (90 Vac to 264 Vac). The design uses CRM/DCM PFC controller UCC28056: and LLC controller UCC256404 with enhanced burst mode which enabled for low standby power and smaller audible noise.  The design achieves 93% peak efficiency at 230-Vac input.
Automotive 144-Zone Local Dimming Backlight Reference Design
This local dimming backlight reference design conserves power: extends the life of liquid-crystal displays (LCDs): and enhances automotive display quality through high dynamic range (HDR) or localized dimming technology. Seven multi-channel constant-current LED drivers allow for 144-zone localized dimming via pulsewidth modulation (PWM) on-time and current-level brightness configuration. A single serial interface allows daisy-chaining of the LED drivers for brightness and configuration programming. Temperature and ambient light sensors enable sensing of the surrounding conditions to protect from overtemperature scenarios and adjust the global brightness based on ambient brightness.
PMP8911
High Eff 2Stage Univ Input Power Supply-Transition Mode PFC LLC Resonant Conv Reference Design
Low EMI: high efficiency: high power factor and reliable power supply are main focus of the PMP8911 design for telecom applications. Transient mode (TM) power factor correction (PFC) with UCC28051 and LLC series resonant converter (SRC) with UCC25600 are applied in PMP8911. Low EMI is expected with zero voltage switching on TM-PFC and LLC-SRC switches. An overall 92% efficiency is achieved at 100W full load. In addition: several protections are embedded into this design which includes input under-voltage protection: input over-voltage protection: output over-voltage protection: and output hic-cup over-power protection.
PMP9415
Isolated Fly-Buck Power Module for PoE Application
The PMP9415 reference design is an single output isolated Fly-Buck power supply for PoE application. It takes 48V nominal input and provides 12V 1A output. The board is designed only Power part which can provide 33V-57V input votlage and 12V 1A output power. The design features the LM5160 synchronous buck converter configured as a Fly-Buck regulator. With the benefit of primary side regulation: the supply has the outputs regulated without the opto-coupler or additional transformer winding. The LM5160 has a wide Vin range of 4.5V to 65V and 1.5A output current capability with integrated switch FETs. The input voltage to the reference board can be loosely regulated with a range of 40V to 57V. 
PMP8012
TPS92310 - 220VAC: 8W Isolated : Triac dimmable
The main purpose of this reference design is to demonstrate a high performance: compact size and triac Dimmable offline flyback LED driver with PFC based on TPS92310. This LED driver is designed for converting an AC input to a regulated LED current. The operating conditions and performance of the reference design are as follows: ●198VAC to 264VAC: 50Hz Input Voltage ●18V to 22V LED Voltage ●350mA Regulated LED Current ●Greater tha 75% Typical System Efficiency ●0.9 Typical Power Factor ●Output Short-Circuit and Open-Circuit Protection
High efficiency power supply architecture reference design for protection relay processor module
This reference design showcases various power architectures for generating multiple voltage rails for an application processor module: requiring >1A load current and high efficiency . The required power supply is generated using 5-: 12- or 24-V DC input from the backplane. Power supplies are generated using DC-DC converters with an integrated FET and a power module with an integrated inductor for size. The design features a HotRod™ package type for applications requiring low EMI. It is also optimal for design time constrained applications. Additional features include DDR termination regulator: input supply OR-ing: voltage sequencing: eFuse for overload protection: and voltage and load current monitoring. This design can be used with a  processor: digital signal processor and field-programmable gate array. It has been tested for radiated emission: per CISPR22 meeting class A and B requirements.
PMP9009
High Efficiency Primary-Side Regulation Flyback with 23-56Vin to 5Vout/0.6A Reference Design
PMP9009 has been designed as a competitive open-frame alternative for the communications market with 23-56Vin to 5Vout/0.6A. PMP9009 has a basic insulation system from input to output making it suitable for a wide variety of applications. UCC28700 is used as the controller for primary-side regulation Flyback converter. PMP9009 has a 81% converter efficiency.
Isolated IGBT Gate-Drive Push-Pull Power Supply with 4 Outputs
This reference design provides isolated positive and negative voltage rails required for Insulated Gate Bipolar Transistor (IGBT) gate drivers from a single 24-volt DC input supply. IGBTs are used in three phase inverters for variable-frequency drives to control the speed of AC motors. This reference design uses a push-pull isolated control topology and provides isolation compliant to IEC61800-5 and is intended to operate from a pre-regulated 24Vdc input.With a regulated (within 5%) input source: a simple open-loop: free-running oscillator can be implemented with a push-pull PWM controller. This topology is essentially a forward converter with two primary windings used to create a dual-drive winding. This fully utilizes the transformer core's magnetizing current more efficiently than flyback or the forward topologies. Another advantage this configuration has over flyback and forward configurations is that the supply output can be scaled up for higher power drives.This reference design also takes advantage of another benefit of the push pull topology in that multiple transformers can be controlled in parallel from a single controller to generate all the isolated voltage rails required for 3-phase IGBT inverters.Lastly: larger IGBTs for higher power drives sometimes require more gate drive current than what is provided by a typical IGBT gate driver: for which designers often use additional transistors for gate current boosting. This reference design provides +16V on the positive outputs and -8V on the negative outputs to compensate for the added voltage drop in those transistors.
Smart brake control and diagnostics reference design for servo drives and robotics
This reference design implements safe brake control functionality in servo drives as per IEC EN 61800-5-2 by providing two channel output signals to control an external holding brake. The holding brake will be latched when the power supply is cut off and released when voltage is applied to the coil. This is accomplished by enabling/disabling the smart electronic load switches that supply power to the coil. This reference design also includes diagnostic features for detecting various faults: ensuring safe operation. TIDA-01600 uses the C2000 Launchpad to generate the brake control signals and to perform the diagnostics functionality.
PMP8020
TPS92560 High Power 20W Boost LED Driver Reference Design
The main purpose of this reference design is to demonstrate a very good compatibility of Power source boost topology LED driver based on TPS92560. This LED driver is designed for converting a power source DC: AC & E-transformer to a regulated LED current. The operating conditions and performance of the reference design are as follows: 12VDC: or 12Vac / 50Hz 60Hz: or 12VAC E-transformer: Output Power 20W: 30-40V LED voltage : 500mA Regulated LED Current : 86% Typical System Efficiency: High Power Factor > 0.9: and output Open-Circuit Protection.
Reference Design - PMOLED Display Power Supply with TPS61046
A PMOLED display is mostly used in the wearable device because of its low power consumption and low cost. This reference design is to demonstrate the TPS61046’s application in powering a PMOLED display. It includes a MCU MSP430G2230: boost converter TPS61046 and a 32 x 128 pixels PMOLED display. The display shows a picture programed by the MCU when the reference design is powered up.
Capacitive Frost or Ice Detection Reference Design: Resolution of <1mm: Temperature Drift <0.25%
Frost and ice buildup on cooling bodies and evaporators can significantly decrease system energy efficiency in many appliance applications such as refrigerators: air conditioners: and freezers. This sensor reference design helps to achieve the more stringent energy efficiency requirements of modern appliances through reducing the number of unnecessary defrost cycles by sensing the amount of ice buildup (resolution of < 1mm) on enclosures and metal surfaces of cooling bodies to trigger defrost cycles only when necessary: versus the traditional defrost trigger method of using a timer or temperature sensor.
Compact: Half-Bridge: Reinforced Isolated Gate Drive Reference Design
This reference design is a half-bridge isolated gated driver used in driving power stages of UPS: inverters: server and telecom applications. This reference design is based on the UCC21520 reinforced insulated gate driver and is capable of driving MOSFETs and SiC-FETs. The design contains a built-in isolated push-pull auxiliary power supply for powering the output of the isolated gate driver. By bringing  together the isolated gate driver and isolated power supply in a compact board with a form factor (!~30 mm × 35 mm): this reference design provides a fully tested robust half-bridge driver solution capable of withstanding >100 kV/μs common-mode transient immunity (CMTI).
Automotive ADAS Reference Design for Four Camera Hub with MIPI CSI-2 Output
This camera hub reference design allows connection of up to four 1.3-megapixel cameras to a TDA3x system-on-chip (SoC) evaluation module (EVM). Each camera connects to the hub through a single coax cable. Using FPD-Link III connections: the cameras are connected to a four-port deserializer. The output of the deserializer is MIPI CSI-2. The design also allows connection of other types of sensors for sensor fusion use cases.
LIDAR Pulsed Time of Flight Reference Design
Light Detection and Ranging (LIDAR) systems use the time taken by the light to fly back and forth to an object in an effort to measure the distance to this target.  The TIDA-00663 reference design shows how to design the time measurement back-end for LIDAR based on Time to Digital Converter (TDC) as well as associated front-end.  The LIDAR pulsed time of flight reference design can be used in all those applications where measuring distance to the target by establishing a physical contact is not possible.  Typical examples include measuring presence of objects on a conveyor belt in logistic centers: ensuring safety distances around moving robot arms among many others.
Universal uP Controlled Battery Charger 24Vin 10 Aout max: 5/12V 2A &amp; 5V 4A: 2 USB Ports Ref Design
BQ24745 is a host controlled synchronous buck battery charger capable of charging batteries at up to 19.2V and up to 8 A normally: extended to 10 A with use of 8 mOhm battery sense resistor. The power train is capable of 8 A with convection only cooling and 10 A with moderate fan cooling (~200 LFM). The Test Report includes Thermal images for both cases. While the design shows a 28 pin MSP430 as the host: any processor with SMBus capability will work. A 5/12V 2A auxiliary converter using TPS54335: and 5V 4A with TPS40170 with 2x CSD18504 are provided. For the two USB ports: the design provides TPS2561A for power switching and TPS2513A for control. A linear TPS70933 provides the 3.3V for the MSP430 and interface signals. A rich Test Interface allows full testing of hardware in the absence of software and then provides multiple interface choices for software development.
对比栏已满,请删除不需要的器件再继续添加哦!
对比栏
取消